NEWS

Company News

Industry Trends

Technical Support

How to clean parts of oil?

How to clean parts of oil?

Mud wash, take sand - free yellow soil, with water and paste yellow mud. Clean up the greasy spots on the farm equipment briefly first, and then apply good yellow mud (apply more to the greasy and thick places). Yellow mud after drying, there will be cracks, oil will be adsorbed on the yellow mud, and then clean the yellow mud with water. Follow this method to repeat the operation 1 times, the effect of removing oil is better.

16

2023

/

02

How are auto parts cleaned?

How are auto parts cleaned?

In the metal processing industry, with people's higher and higher requirements for zero performance and processing efficiency, cleaning agent is no longer a simple decontamination effect, but has been given more requirements. According to the characteristics of metal materials, the cleaning agent used is required to effectively decontaminize at the same time, but also need to play the role of rust prevention on the surface of metal parts, enhance the corrosion resistance of the product, which puts forward higher requirements for the additives added in the cleaning agent.

16

2023

/

02

How to clean aluminum alloy or aluminum?

How to clean aluminum alloy or aluminum?

When choosing the use method and advantage of ultrasonic cleaning agent for aluminum, the following factors should be considered: 1. The use of ultrasonic cleaning machine, according to the characteristics of the cleaning agent to choose the correct cleaning method, before cleaning according to the cleaning object to make different cleaning solutions, because the cleaning effect of aluminum alloy cleaning agent on the market are different, if used improperly will cause damage to the surface of the object.

16

2023

/

02

What kind of cleaning method should bearings choose?

What kind of cleaning method should bearings choose?

The cleanliness of bearings is an assessment index of bearing quality, which must be guaranteed by the cleaning quality of the production process. The improvement of cleaning quality requires not only strict production management, but also the application of advanced cleaning technology to meet the cleaning requirements of products. At present, in the bearing industry, the way of bearing cleaning is mainly spray cleaning with gasoline or kerosene as cleaning medium. This way is not only high cost, high labor intensity, low production efficiency, and poor safety, more important is that this cleaning method is difficult to meet the standards of bearing cleanliness requirements. It is of great significance to seek a safer, more economical and more efficient cleaning way for the cleaning of bearing finished products.

16

2023

/

02

Do you know why we use electricity to remove oil powder in metal pretreatment?

Do you know why we use electricity to remove oil powder in metal pretreatment?

Electrodeoiling, also known as electrochemical deoiling, is the primary process in electroplating process, and is widely used in oil removal. Electric lifting oil powder is to clean the impurities and oil on the surface of the parts of the potion, if the workpiece oil is not clean, resulting in poor wettability between metal and plating solution, affecting the electrodeposition of metal ions, trace oil can also cause coating and substrate bonding force is not good, it will lead to coating foaming and peeling.

28

2022

/

07

What effect does metal grease cleaner have?

What effect does metal grease cleaner have?

In the process of metal surface treatment, oil removal is a very important process, the purpose is to remove all kinds of grease on the metal parts, because the cleanliness of the metal surface after oil removal, will directly affect the subsequent process, thus affecting the quality of the final product, so what role does the oil cleaning agent have? Today Xiaobian will take you to find out.

10

2022

/

01

A simple understanding of the use of hydraulic oil cleaning agent

A simple understanding of the use of hydraulic oil cleaning agent

Generally speaking, hydraulic oil plays the role of anti-wear, lubrication and cooling in the process of metal processing. However, due to its large viscosity and strong adhesion, the oil of metal parts is thick, which is difficult to clean and causes the next process to be unable to proceed normally. It is often necessary to use ultrasonic equipment with water-based hydraulic oil cleaning agent to remove the residual oil on the surface of parts.

12

2021

/

11

< 12 >